Posted on 97 Comments

Goat Milk Soap Recipe – Stunningly Easy To Make It Yourself

goat milk soap recipe

Goat Milk Soap Recipe – Stunningly Easy To Make It Yourself. Make this goat milk soap recipe using ingredients that are easy to find.  Sodium hydroxide (lye) can be found over at Amazon by clicking on this purchase lye link. You can also use canned goat’s milk, powdered goats milk or fresh, in the fridge section of your grocery store. Important information if you don’t have access to raw goat’s milk from your own goats or a friend willing to share. (find the supplies you need to make soap here)

Goat Milk Soap Recipe

  • 18 oz slushy raw goat milk
  • 6 oz water
  • 6 oz lye (sodium hydroxide)
  • 9 oz olive oil
  • 10 oz coconut oil
  • 24 oz vegetable shortening or lard

Directions

Heat the solid oils until they are almost melted. Take the pot off the heat source. Swirl the oil until they melt the rest of the way. Add in the olive oil. Set aside to cool down to 100 degrees.

Mix the lye and water. Mix the lye into the water (Important note for controlling how fast the reaction happens). It will heat up so I like to use a tall container. A plastic pitcher works great even though there isn’t a whole lot of liquid in the bottom. I also like to put the pitcher in a basin of ice water while I am mixing the lye into the water. This get the mixture to cool down to 100 degrees faster.  Because I’m not a patient person myself, to speed up the cooling of the lye/water mixture you can slip a few ice cubes down the side of the pitcher.  When everything is 100 degrees mix the lye/water into the oils, give it a quick stir with a wooden or plastic long handled spoon then add in the raw goat milk.

easy homemade goats milk soap recipe

Mixing to Trace

Mix with your stick blender until trace. Your soap mixture should look like thick vanilla pudding. At this point add in a few drops of what ever flavor essential oil you wish and what ever extra pieces of stuff. Give it another swirl or two. Now you pour your mixture into soap molds or card board soup trays (even ramine boxes work) lined with wax paper. Cover with towels and let sit overnight. After about 24 hours dump out your soap, cut (here is a funny crinkle cut knife article I wrote), then let stand on end for several weeks to dry out. Enjoy!

How to tell if your goat milk soap recipe has reached trace

When using a stick blender to get to the point of trace it is a good idea to start and stop the blender, not run it continuously.  I just use my stick blender as a spoon and turn it on intermittently as I’m waiting for the soap to trace.

If you happen to pour your soap into the mold before it has really traced and it separates you can always pour it back into your pot do this. Heat it up slowly and blend it some more until it reaches a real trace.

The other problem is going past the trace mark right into seized. Again you can recover from this. Grate the soap up then reheat (slowly) and add more goat’s milk (a little at a time) until it is no longer seized. Then just put it in the mold and let it set up.

Your Goat Milk Soap Recipe Has Seized What can you do?

You can prevent it by paying attention to the temperature and water amount. Soap cool and don’t discount your water. When you are using a new fragrance or essential oil and don’t know how it will effect your soap, make a one pound test batch first. If it is happening, don’t panic!

With a light seize, where just where you are stick blending on the bottom of the pot is seizing, stop stick blending and stir to trace by hand.

goat milk soap recipe

With a heavy seize that you can’t save, you’ve got three options!

Hot Process it – Dump it into a crock pot and hot process it. If it goes beyond the point of being able to stir it smooth and pour into a mold, you can hot process it. Simply put it into a crock pot and cook it until the whole mass has gelled (turned translucent) and then glop it into a mold.

Rebatch it – If you managed to get it into a mold but it is UGLY, you can rebatch it. Here are rebatching instructions. If you do it the day after, you usually won’t have to add additional water to it. If you rebatch it weeks later, you can add a bit of water to the shreds before cooking.

Chunk it – You can let your soap sit until solid. Cut it up into little chunks. Make a new batch of soap and add the chunks into the new batch. I’ve come up with some really nice

Why I love Goats Milk Soap

Of course if  you want to use goat milk soap much faster, you can always order it at HartNana’s store.

Save

Save

Posted on 10 Comments

Homemade Goat Milk Soap Recipe For Beginners fast & easy Get Stunning Results

Goats Milk Soap Recipe For Beginners
Get Great Results making goat milk soap

Having been a soap maker for quite a few years now, I have discovered this secret almost by accident and now make wonderfully luxurious cream colored goat’s milk soap.  Using this secret disclosed in the homemade goat milk soap recipe for beginners,  you will be making great soap for your family and friends too, with very little headache.

Easy To Find Ingredients

Most of these ingredients can be purchased at your local grocery or health food store, except for the lye (sodium hydroxide) that will need to come from an online source probably Amazon. You can get smaller quantities from them and it is shipped without hassle for a reasonable price.  It is hard to keep 50 pounds of lye around if you aren’t making soap in large quantities. 50 Pounds is the quantity sold most commonly by soap maker supply companies.

What you need to make Goats Milk Soap For Beginners

As far as utensils go; it really depends on how much soap you plan to make. This recipe will make about three pounds of soap – enough to cover the bottom of a Campbell’s soup box (you know the cardboard that holds a case of soup). If you cut it in half then you could make 8 bars in soap molds.

I like to use an enamel pot that has high sides. I melt the solid oils together first over low, then add the olive oil so cool the oils down to 100degrees. And then when I mix the lye solution in I’m less likely to splash the mixture on myself. (Vinegar is the neutralizing agent for lye – keep it out and handy if you get some lye or lye mixture on you, douse with vinegar and it will stop the burning).

Though you may be tempted to make this without safety glasses, refrain. Wear those glasses! And gloves.  Wear gloves.

Okay, enough on the safety warnings. I’m sure you have your own mother to mutter these little warnings to  you so you don’t need me.

I have a plastic pitcher, a wooden spoon and a separate little glass container that I use for all things lye related. You can get  all of the supplies you need to make soap here

Here is the list:

  • An enamel or stainless steel pot (it doesn’t have to be real big)
  • 1 plastic pitcher
  • 2 wooden spoons
  • 1 stick blender (doesn’t really need to be dedicated to making soap, but be sure to wash it well)
  • 1 kitchen scale (the balance scales work okay for this recipe,  you will need a serious scale for most soap recipes though)
  • 2 glass thermometers
  • safety glasses
  • plastic gloves
  • vinegar on hand
  • a big plastic or glass bowl to set your lye mixture pitcher in.

That is it!

This is the homemade goat milk soap recipe for beginners:

  • 18 oz slushy goat’s milk – This can be from the grocery store, from a friend, from your goat, or powered that has been reconstituted. It also needs to be partially frozen for best results.
  • 6 oz water
  • 6 oz lye (sodium hydroxide)
  • 10 oz coconut oil
  • 24 oz of shortening or lard
  • 9 oz olive oil

That is it!

Learn to make goats milk soap perfectly even if you are a beginner with stuff you mostly can find at your local grocer

Here is the secret to getting cream colored goat’s milk soap

Rather than the orange/brown stuff that most beginners end up with. The reason goat’s milk soap turns brown is because the lye causes the milk solids to burn. The way around that problem is to mix the lye with water first, then mix the lye into the oils and then add the milk.

Another important point is that  you want  your lye solution and your oil to be about the same temperature and that temperature needs to be 100 degrees. It does make a difference.

I like to mix my lye solution over an ice bath. So I put the pitcher in a big bowl full of ice, mix the lye into the water s l o w l  y   so it doesn’t explode and then drop ice cubes down into the solution to get it to cool down quicker. I’m so not the patient type.

Here are the steps to the Homemade Goat Milk Soap Recipe for Beginners:

  • Heat the coconut oil and shortening/lard until it melts in the big pot. Take it off the heat and add olive oil.  Set aside to cool.
  • Put on your safety glasses and gloves
  • Put the pitcher in the ice bath add the water and then the lye to the water.
  • Once both are the same temperature, 100 degrees, mix the lye into the oils (DO NOT DO THIS THE OTHER WAY AROUND )
  • Add the milk.
  • Use the stick blender to mix and blend. Do this in pulses of 20 seconds or you will burn out your blender. Between pulses stir with the blender.
  • When the concoction traces it will look like vanilla pudding. Trace just means that it hold the shape of a swirl, like, as I said, vanilla pudding.
soap trace

Once it begins to trace add your essential oil and extra stuff. I like to use lavender oil and lavender bits, but you can add almost anything. If you are planning to add oatmeal, you need to grind it up first. Take it from me, the whole oats things doesn’t work so well, I know, I’ve tried it.

Adding Stuff To Your Soap

When it comes to adding essential oils, I only add a few drops. For honey/oatmeal soap, I add about 1/4 cup of honey and a cup of oats. Also I have found that sandalwood oil can cause your soap to seize. (turns hard really fast) so go slow when adding that.

Make sure that you have lined your cardboard molds with wax paper before you start if you are planning to use cardboard molds. Pour your mixture into the mold after it has traced and you’ve added all your stuff and made sure it traced again.

Before you Cut Your Soap

Let the soap sit in the mold for 24 hours – it will harden up. You then want to dump it out and cut it into the shapes you want. Let it cure for at least 2-3 weeks before using. Enjoy!

The whole process shouldn’t take you more than maybe an hour from start to finish.

If you have questions ask them below, I follow this blog pretty closely and love to help new soap makers get started!

scalescaleClick HerelyelyeClick Hereenamel potenamel potClick Herehigh side enamel pothigh side enamel potClick HerethermometerthermometerClick Hereplastic pitcherplastic pitcherClick Herewooden spponswooden spponsClick Herepowdered goats milkpowdered goats milkClick Herecoconut oilcoconut oilClick Hereolive oilolive oilClick Hereessential oilsessential oilsClick Heresoap moldsoap moldClick Heresoap moldsoap moldClick Heresoap moldsoap moldClick Here

Don’t forget to grab your copy of The Soap Maker’s Journal so that you can keep your recipes in one place. Every time I make soap I always do something a little different. Recording the adjustments in this journal allows me to repeat success and avoid repeating unwanted results.

Soap maker's journal for bath and body product crafters. Keep all your notes in one place. #soapmaking #homemadesoap #goatsmilksoap @hart_nana
Posted on 8 Comments

Making Goats Milk Soap For The First Time

alora-fairy-festival

Memories of “you’re gonna shoot your eye out” come to mind when I think about making goats milk soap for the first time. Or really making any homemade soap.  I knew almost twenty years ago now that I wanted to make homemade soap. It was while standing in “Summers Past“.  A wonderful little garden shop on the outskirts of San Diego that I made the decision that I really wanted to live a country life. Making soap, baking bread, playing in the garden and canning my produce was the life I wanted.

My last trip to San Diego,  my daughter, grand children and I went back to Summers Past for a Fairy Festival.

alora-fairy-festival

Such a wonderful, magical place. Being there brought back the memories of the stirring to live a more simple life.

Making goats milk soap for the first time

That first Christmas after telling my husband that I wanted to make my own soap; he bought me a big stainless steel stock pot.   Now I would have something to make the soap in. That was all I really knew that I needed. A big pot and something about using a paint paddle to stir the ingredients. In my mind I was going to be making vats of soap. (I laugh when I think back on how the process appeared to me at the time.)

My grandmother (who was an immigrant from Czechoslovakia, and whom my mother swears was a gypsy) used to make lye soap for washing clothes.  I am pretty sure she made it by running water through ash and then adding fat she rendered from the meat she cooked. My mother tells stories about the big vat my grandmother used in the yard to make the soap. We were never to touch “grandma’s lye soap” for fear (mostly on my mom’s part) that we would get burned by the lye.

I tell you this story so that you will understand, that my fear of lye and working with lye stemmed from hearing this story as a young girl. So that pot sat for many years before I actually worked up the nerve to buy some lye to make soap.  First I fiddled around with melt and pour soap. Also melting down bars of soap that were scraps and reforming them.

Making Goats Milk Soap – Just Go For It!

Then one day several years ago I decided that I was “going for it”. Armed with safety goggles, rubber gloves and stern warnings to the children and pets that no one, and I meant no one, was to come anywhere near the kitchen while I was working.  Carefully, I laid out newspaper every where, got all of my supplies out. I was ready!

I measured every ingredient exactly. Mixed everything together the way the instructions called for. And except for the fact that I did not have a stick blender while using a recipe that was heavy on the olive oil my first adventure went alright. I did have to stir my soap for five or six HOURS to get it to trace. So, when I suggest to people to get a stick blender if they are going to make soap, it is with that experience in mind that I recommend them.  A good friend of mine uses an old plastic bucket and a paint paddle hooked to his drill to make soap.

Making Goats Milk Soap From Start To Finish

The time it takes me to make homemade goats milk soap has gone down considerably. I can usually make two batches from start to finish including clean up in an hour and a half. Though I am still respectful of lye, I have discovered that keeping vinegar on hand will neutralize any mishap.  Always mix your lye into your liquid and then the liquid/lye into the oils, so it is not necessary to be fearful of it.

Making homemade soap and cooking — just different forms of the same thing. Once you get the hang of the basics, the sky is the limit when it comes to expressing creativity.  It is my hope that you will enjoy your soap making adventures too.  Feel free to leave comments below. I love connecting with other soap makers and want to be soap makers.

 

Homemade Soap Making Supplies

homemade goat milk soap recipe

Ingredients for making homemade goat’s milk soap Here are convenient links to all of the ingredients you will need to craft your own homemade goat’s…

Easy Soap Recipe

Easy  Soap Recipe – With Pumice! You either live with a mechanic or you’re a gardener. In any event you are looking for a pumice…

Goat Milk Soap

homemade goat milk soap recipe

Hart Nana’s Goat’s Milk Soap is handcrafted just outside of Preston Idaho in the Cache Valley. Our all natural soap is made with fresh, raw…